Crescendo audio BC2000D Owner'S Manual Download Page 8

1 Year Limited Warranty 

Crescendo Audio strives to satisfy every customer and make absolutely sure that every
customer is fairly taken care of in the rare event that your amplifier malfunctions.

Each new Crescendo amplifier is backed by a 1 year limited warranty from date of
purchase. A warranty authorized amplifier will be either replaced with a new unit or
repaired. Warranty does not cover accidental damage, improper installation/wiring,
misuse, abuse, car accident resulting in amplifier failure, failure due to natural disaster,
or third party amplifier modifications. This warranty is limited to the amplifier and
specifically excludes any incidental or consequential damages connected therewith.
Warranty is non-transferable from original owner provided that new owner can prove
date/place of purchase.

All warranty returns must be sent Crescendo Audio or our repair facility. Crescendo 
Audio is not responsible for damage of a returned amplifier due to poor packaging not
suited for proper shipping. So make sure your amplifier return is packed in its factory
box or an equivalent!

For warranty inquiries/RMA requests please email us at [email protected]
or visit our website, www.crescendoaudio.com and enter your inquiry through the
contact us page.
You may also contact us va phone Monday - Friday at ( 941 ) 257 4767

  

Summary of Contents for BC2000D









Reviews: