5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 1998 All rights reserved.
Litho in U.S.A.
®
CO-151-F-1818B
In line with its policy to continually improve its products,
CRES-COR reserves the right to change materials and
specifications without notice.
SHORT FORM SPECIFICATIONS
Cres Cor Roast-N-Hold Convection Oven Model
CO-151-F-1818B. Removable power unit 20 ga. 304
stainless steel, recessed control panel. Cabinet and Dutch
doors 22 ga. 304 stainless steel; stainless steel internal
frame; coved corner interior. Fiberglass insulation in sides
2”; back, doors and base 1-1/2”. High temperature
magnetic latches. No-tip channel interior for 18" x 26" pans
on 3" centers. One piece base .125 aluminum. 5" swivel
modulus casters, Delrin bearings. Load capacity 250 lbs.
each. 8200 Watts,
Volts, 60 Hz.,
Phase. 2 year
parts warranty. Provide the following accessories:
____ ____ ____
. UL Sanitation,UL, CUL listed .
CRES-COR
PAN
DIM “A”
DIM “B”
DIM “C”
INSIDE DIMENSIONS
WEIGHT
MODEL NO.
CAP
SIZE
WIDTH
DEPTH
HEIGHT
WIDTH
DEPTH
HEIGHT
ACT.
18 X 26
IN
25-3/8
37-3/4
73-1/2
18-1/4
26-1/2
58
LBS
338
CO-151-F-1818B
18
460 X 660
MM
645
960
1870
465
675
1475
KG
153
ALL CONSTRUCTION IS RIVETED, WELDED AND FINISHED.
CABINET:
• Body: 22 ga. 304 stainless steel.
• Reinforcement: Internal framework of 16 ga. stainless steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
•
75˚F. 1-1/2” in back wall, doors, base; 2” in side walls.
• Air tunnel: 20 ga. stainless steel, lift-out type, mounted
•
on rear wall.
• Push/pull handles (2): 7” vertical; recessed.
BASE:
• One piece construction, .125 aluminum.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
•
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.
DUTCH DOORS:
• Field reversible.
• Formed 22 ga. 304 stainless steel.
• Latches: Chrome plated steel, high temperature ceramic magnetic
•
type; mounted inboard.
• Hinges: Heavy duty chrome plated steel, lift-off type; mounted
•
inboard.
• Gaskets: Perimeter type, silicone.
• Pan stops: Embossed.
PAN SLIDES:
• 18 ga. 304 stainless steel channels on 3" centers.
• Grids (6): Nickel chrome plated steel, raised wire 17" x 25".
POWER REQUIREMENTS AVAILABLE:
• 8200 Watts, 208 Volts, 60 Hz., 1 phase, 39 Amps.,
•
50 Amp. service.
• 8200 Watts, 240 Volts, 60 Hz., 1 phase, 34 Amps.,
•
50 Amp. service.
• 8200 Watts, 208 Volts, 60 Hz., 3 phase, 23 Amps.,
•
30 Amp. service.
• 8200 Watts, 240 Volts, 60 Hz., 3 phase, 20 Amps.,
•
30 Amp. service.
POWER UNIT COMPONENTS:
(refer to above drawing)
• Body: Formed 20 ga. 304 stainless steel with black control
•
panel, recessed and tilted 7˚.
A) Thermostat (holding): Solid state, room ambient to 250˚F. (121˚C.).
B) Thermostat (cook/retherm): Solid state, room ambient to 350˚F.
B)
(176.5˚C.).
C) Pilot lights (2).
D) Switch: Lighted ON-OFF rocker type.
E) Timer: 24 hr. digital countdown; infinite memory retention.
F) Thermometer.
• Power cord: Permanent, 6 ft., 6/3 ga. with right angle plug.
• Heaters (3): 2670 Watts each.
• Blower motors (3).
• Vent fans (2).
• Fuses (2): 3 Amp.
INSTALLATION REQUIREMENTS:
• Check local vent hood codes for mobile Roast-N-Hold ovens.
DETAIL OF
PAN SLIDE
