Trendsetter 400/800
8
Trendsetter 400/800
Removing a Flyoff
Open the front panel:
a. Rotate the two latches on the
front panel to the vertical position
(90° counterclockwise).
2
b. Lift the front panel.
Rotate the drum to expose
the trailing-edge clamps.
3
Slide the trailing-edge
clamps off the plate.
4
Fold over the corners
of the plate.
5
Press the leading-edge
clamps to free the plate.
6
Clean out any debris
left behind.
7
In Print Console, click
Resume
.
8
Reposition the trailing-edge clamps:
a. Align the trailing-edge clamps with the
leading-edge clamps.
9
Close the front panel, then
close the top panel.
10
In Print Console, click
Resume
.
11
b. Ensure that the S or N (magnetic polarity)
on each clamp matches the S or N label on
the drum.
The device suspends activity.
1
* Refer to the
Operator Manual
for full details.
CAUTION:
Wear protective
gloves when handling plates.*
CAUTION:
If you have an
implanted cardiac pacemaker,
stay more than 7 cm away from
the magnetic clamps.*
!
The top access
panel opens by
itself.
