Creo Trendsetter 3244+ AL, Operator'S Manual

Page: 19 / 134

Trendsetter 3244+ AL System 5
Using the Trendsetter 3244+ AL Safely
For your safety, the unload table is equipped with safety panels and an
audible warning device. When the unload table is about to lower to a
horizontal position, or raise to an upright position, a warning beeper will
sound. See Figure 3 on page 8.
As an additional protective measure, safety panels are situated on the left
and right sides of the unload table. These plexiglass panels help protect
against injury when the unload table is lowering or raising, and from
moving parts inside the unload table.
CAUTION: Keep your hands and fingers away from the unload table when you
hear the beeping sound.
CAUTION: The output device contains static-sensitive subassemblies. If you
must access the interior of the output device, be sure to wear a grounding wrist
strap. Do not touch any of the electronic subassemblies, the exposure head, or
any wiring or cables when accessing the inside of the output device.
WARNING: Instructional and cautionary labels are located throughout the
output device (see Appendix B, Labels ). Disregarding these labels can result in
personal injury or in damage to the equipment.