104
Appendix B—Labels
Static Discharge Caution Label
This label is located in four places:
•
above the external bulk head, on the rear-left inside of the output
device
•
on the top of the Trendsetter interface board, on the top-right upper
surface
•
on the right end (when facing the front of the machine) next to the
load/unload board
•
on the exposure head
Figure 59: Static Discharge Caution label
Hazardous Voltage Label
This label is located on the terminal box service access cover in the fan box.
DANGER: The Hazardous Voltage label is located on service access
panels that house hazardous voltage. For your safety, do NOT attempt to
open these panels.
Figure 60: Hazardous Voltage label
USE A STATIC DISCHARGE
STRAP WHEN TOUCHING OR
SERVICING ANY COMPONENTS
USE A STATIC DISCHARGE
STRAP WHEN TOUCHING OR
SERVICING ANY COMPONENTS
CAUTION!!
74-3037A
Summary of Contents for Trendsetter 3244+ AL
