Creo Color Controller C-80, Technical Manual

Page: 94 / 150

78 Chapter 4—Diagnostics and Troubleshooting
2. Perform one of the following tasks:
•
Stripe the foreign disks— See Striping Foreign Disks on page 78.
•
Stripe the unknown disks—See Striping Unknown Disks on page 80.
•
Remove the missing disk—See Removing a Missing Disk on page 82.
3. After completing disk striping, the following message appears:
4. Click OK .
Striping Foreign Disks
Perform the following procedure to remind the operating system that a striped
volume resides within the operating system.
1. In the Computer Management window, verify that the disks you need to stripe
(Disk 1, Disk 2, or Disk 3) are labeled Dynamic .
2. Right-click in the area where the disk is designated Dynamic , and select Import
Foreign Disks .