OARS & OARLOCKS
(1) Pair 8 foot, 3 piece oars
(1) Pair bronze Oarlocks, with split rings
(1) Pair Oar Stoppers
(4) Oarlock Bushings
WARRANTY CARD & PATCH KIT
REAR ROWING FRAME (CONTINUED)
(1) Standing Platform
(1) Short U-Bar
(1) Under the Seat Zippered Mesh Bag
(1) Cargo Deck
(1) Stripping Apron with Waist Belt
(2) Long Snap Pins
(22) Short Snap Pins
I. FRAME ASSEMBLY
NOTE: Your frame assembles using (60) Short Snap Pins and (6) Long Snap Pins. Please follow instructions accordingly. Seat
Support Frame Member with Lift and Lock Anchor Drop System is designed to be used in Center Rowing Frame.
A. ASSEMBLE FRONT FISHING FRAME USING THE FOLLOWING STEPS:
1. Assemble Padded Seat Back (see figure 1b) by sliding Padded Seat Back over Seat Back Frame.
2. Assemble Seat Support Frame Member to Left and Right Frame Members using (4) of the Short Snap Pins.
(see figure 1). Note: Seat Support Frame Member and Tall Seat Support Frame Member are pretapped with
standard four hole configuration to accept an optional molded seat.
3. Assemble Tall Seat Support Frame Member to Seat Support Frame Member using (4) Short Pins. (see figure 1b).
4. Assemble Padded Seat Bottom to Tall Seat Support Frame Member (see figure 1b).
5. Hold the Padded Seat Back vertically and attach to Padded Seat Bottom using (2) Long Snap Pins (see figure 1b ). After
assembly Padded Seat Back can pivot forward to fold seat down and pivot back to stop in sitting position.
6. Assemble Leaning Bar to Left and Right Frame Member. Do not insert (2) Short Snap Pins until following step 7
(see figure 1).
7. Assemble Standing Platform to Left and Right Frame Members using (4) Short Snap Pins. ( 2 ) of these pins also pin
together Leaning Bar and finish step 6.(see figure 1)
8. Assemble Long U-Bar to back of Left and Right Frame Member using (2) Short Snap Pins. (see figure1).
B. ASSEMBLE CENTER ROWING FRAME USING THE FOLLOWING STEPS:
1. Assemble Padded Seat Back by sliding Padded Seat Back over the Seat Back Frame ( see figure 1a).
2. Assemble Seat Support Frame Member with Lift and Lock Anchor Drop System to Left and Right Frame Members using (4)
Short Snap Pins (see figure 2).
3. Assemble Padded Seat Bottom to Seat Support Frame Member using (4) Short snap pins (see figure 1a).
4. Hold the Padded Seat Back vertically and attach to Padded Seat Bottom using (2) Long Snap Pins (see figure 1a ). After
assembly, Padded Seat Back can pivot forward to fold seat down and pivot back to stop in sitting position. (see figure 1a)
5. Assemble Long U-Bar to back of Left and Right Frame Member, using (2) Short Snap Pins (see figure 2).
6. Assemble Foot Brace to front of Left and Right Frame Member. Foot Brace can be assembled in longer position using 2 Short
Snap Pins or shorter position using 4 Short Snap Pins (see figure 2).
ODC 1624
OUTDOOR DISCOVERY CRAFT
ASSEMBLY INSTRUCTIONS
Please take a moment to lay out all frame parts as shown in figures 1, 2 & 3 to familiarize
yourself with the frame parts of your new pontoon boat.
Summary of Contents for OUTDOOR DISCOVERY CRAFT ODC 1624
Page 6: ......
