Features found on your Creek Company ODC 420™
(see Illustrations)
Carry Handle
ILLUSTRATION 2
BOTTOM VIEW
ILLUSTRATION 1
TOP VIEW
Stripping
Apron
Stripping
Apron
Seat Bottom
Seat Back
D-Rings
to attach
Pack
Straps
(Pack Straps
not included)
Grommets
1. Carry Handles (top & bottom)
2. D-rings to attach Pack Straps (Pack Straps not included).
3. D-Rings to attach gear (two on nose of Pontoons and two on outside of Pockets).
4. Pockets with five separate storage areas plus mesh for additional storage.
5. Foam Fly Patch for drying and storage of flies.
6. Stripping Apron for collecting your fly line.
7. Adjustable Seat Back for comfort
8. Handy Ruler on Stripping Apron to measure fish.
9. Grommets for water drainage
10. Heavy Duty 30 oz. PVC material on bottoms for extra durability.
(Valves for
Bladders
located in
Pockets)
Grommets
Foam Fly
Patch
Inflating Your Creek Company ODC 420
™
Note:
We use Boston Valves as the Valve Assembly for the ODC 420
™
. A Hand or Foot Pump with the proper adapter
size for a Boston Valve is needed to inflate your ODC 420
™
. If you need to purchase the proper Pump please contact
the store where you bought your ODC 420
™
, or the Creek Company directly. Before inflation, be sure to fully seat each
Valve Assembly into the Air Bladder, screwing tightly by hand. When fully seating Valve Assembly, be sure that the
Valve Plate is in place around the Valve Assembly and not restricting the Valve Assembly from full seal. After inflating,
be sure to fully seat the Top Cap on to each Valve Assembly, screwing tightly by hand. Both are required for an airtight
seal. (see illustration 3 for Valve Assembly explanation)
1. Inflate both of the Air Bladders, one at a time, until firm. Valves for Air Bladders are located inside
main pockets. (One on each side, see illustration 1).
2. Again, be sure Top Valve Cap and Valve Assembly are fully seated.
3. Do not over-inflate
Deflation:
Unscrew entire Valve Assembly from Air Bladder to deflate the Air Bladders of your ODC 420
™.
Top Valve Cap
Valve
Assembly
Valve
Plate
Bladder
Valve Insert Detai
l
D-Rings
Grommets
ILLUSTRATION 3
Accessories are available for your ODC 420
™
. Ask for them where you bought your ODC 420
™
,
or visit the Creek Company Store at www.CreekCompany.com
The Creek Company, PO Box 773892, Steamboat Springs, CO 80477
970-879-5221 • fax 970-879-7577 • email: [email protected] • Made in China
Specifications and other details subject to change without notice. All Creek Company products are
guaranteed against defects in material and workmanship for the life of the product to the original owner.
This does not cover damage due to misuse or normal wear and tear.