Copyright © 2008-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
and XLamp
®
are registered trademarks and the Cree logo is a trademark of
Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty
information, please contact Cree Sales at [email protected]. Other trademarks, product and company names are the property of their respective owners and do not imply specific product and/or vendor
endorsement, sponsorship or association.
9
XLamp
®
XR FamiLy LED SoLDERing & HanDLing
assEmbLy sToRagE & HanDLing
Do not stack PCBs or assemblies containing XLamp XR family LEDs so that anything rests on the XLamp LED lens. Force applied to the
XLamp LED lens may result in the lens being knocked off. PCBs or assemblies containing XLamp XR family LEDs should be stacked in a
way to allow at least 1 cm clearance above the LED lens.
Do not use bubble wrap directly on top of XLamp XR family LEDs. Force from the bubble wrap can potentially damage the LED.
X
WRong
X
WRong
P
CoRRECT
P
CoRRECT
