13
Introduction for buttons on remote controller
● When selecting auto mode, air conditioner will operate automatically according
to ambient temperature. Set temperature can’t be adjusted and will not be displayed
as well. Press "
F
AN" button can adjust fan speed. Press " " / " " button can
adjust fan blowing angle.
● After selecting cool mode, air conditioner will operate under cool mode.
Press "+" or "-" button to adjust set temperature. Press "FAN" button to adjust
fan speed.Press " " / " " button to adjust
fan blowing angle.
● When selecting dry mode, the air conditioner operates at low speed under dry
mode. Under dry mode, fan speed can’t be adjusted. Press " " / " " button to
adjust fan blowing angle.
● When selecting fan mode, the air conditioner will only blow fan,Press "FAN" button
to adjust fan speed. Press " " / " " button to adjust fan blowing angle.
● When selecting heating mode, the air conditioner operates under heat mode.
Press "+" or "- " button to adjust set temperature. Press "FAN" button to adjust
fan speed. Press " " / " " button to adjust fan blowing angle. (Cooling only
unit won’t receive heating mode signal. If setting heat mode with remote controller,
press ON/OFF button can’t start up the unit).
Note:
● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5
minutes to blow air (actual delay time is depend on indoor ambient temperature).
● Set temperature range from remote controller: 16~30
ć
(61-86°F);
no display
9
(horizontal louvers stops
at current position)
button
● Under simple swing mode, press this b
utton can turn on ( display " " icon) or
turn of
f ( not display " " icon) up&down swing function.
● Under OFF status, press "+" button and " " button simultan
● Under fixed swing mode, press this button and up and down swing status will
eously can switch
change in the sequence as below:
between simple swing mode and fixed swing mode. During switching time,
“ ” icon on remote controller will flash twice.
