3 of 4
LPN00212X0003A8
ElEcTrIcal connEcTIons For connEcTIng
MUlTIPlE lUMInaIrEs TogETHEr:
sTEP 1:
Attach two fixtures together with screws & nuts
provided. See
Figure 8.
sTEP 2:
Remove endcap cover of first fixture to reveal through-
wiring plug. Open swing door of connecting fixture and
remove knockout and extend wiring in preparation for
connections. See
Figure 9.
sTEP 3:
Carefully feed AC and dimming plugs into wiring
compartment through knockout opening. Remove black
connector and terminate leads according to local
codes.
sTEP 4:
Connect male and female AC connectors.
See
Figure 10.
sTEP 5:
Tuck lead ferrite into far AC wiring compartment as
shown in
Figure 10.
sTEP 6:
Place AC connector assembly flat into AC wiring
compartment as shown in
Figure 11.
sTEP 7:
Close swing door assuring no leads are pinched.
Continue powering fixtures until entire row is complete.
sTEP 8:
Remove protective plastic wrap and wire tie from
center stiffener.
8
9
10
AC
Connector
Ferrite
AC
Connectors
AC Wiring Com-
partment
11