2 of 2
LPN000100_D
5
6
REMOVAL OF CR150
NOTE:
Ensure power to fixture is
disconnected before attempting to
remove CR150 from ceiling.
To remove fixture from the ceiling,
firmly grasp the outer ring and slowly
pull the fixture from the ceiling.
STEP 4:
Power Connection:
Insert the “Ground”
wire into the terminal block port labeled
with the universal ground symbol. Insert
the “Line” wire into the terminal block
port labeled “L”. Insert the “Neutral” wire
into the terminal block port labeled “N”.
Wire can be inserted into either port
under respective symbol. Ensure wire is
secure in terminal block. Care should be
taken not to damage wiring during this
process. See
Figure 3.
NOTE:
Maximum current for looping-in is
16A when connecting multiple fixtures.
STEP 5:
Strain relief wires with strain relief clips.
See
Figure 4.
STEP 6:
Close lid and re-engage snap features.
STEP 7:
Assemble installation plate onto power
supply lower housing.
STEP 8:
Re-install lid onto power supply by
fastening with screws removed in Step 1
STEP 9:
Insert power supply into ceiling opening.
See
Figure 5.
STEP 10:
To insert the CR150 in the ceiling
opening, feed all excess wiring into
ceiling. Carefully rotate both retention
springs up until they reach the lid of the
integrated junction box. Insert the CR150
into the ceiling with wiring or conduit
first. Once the springs are through the
ceiling opening carefully release the
springs allowing the CR150 to seat itself
in the ceiling opening. See
Figure 6.
STEP 11:
Installation is complete. Reconnect
power at main power source.
4
3
Limited Warranty: Cree warrants to the original purchaser (the “Buyer”) of the Cree® CR Series downlight purchased (the “Product”), that the Product will be free from material defects in workmanship and materials under normal use and service and conform
to Cree’s written specifications. This limited warranty extends for a period of five (5) years from the date of original purchase of the Product (the “Warranty Period”). There is NO WARRANTY in cases of damage to the Product in transit or damage caused by
your negligence; abuse; abnormal usage; misuse; accidents; damage due to environmental, corrosive or natural elements; improper power supply; failure to follow Cree’s instructions or applicable electrical codes; improper installation, storage or maintenance;
damage due to acts of God; fire; vandalism; civil disturbances; power surges; alteration; mishandling; and incorrectly or improperly performing maintenance or repair by someone other than Cree or its authorized service provider. Remedy: If the Product proves
defective during the Warranty Period and the Product return procedures set forth below are followed, Cree will in its sole discretion, as its sole and exclusive obligation under this warranty, refund you the purchase price of the Product, repair the Product or replace
the Product without charge, F.O.B. Cree’s designated facility. Proof of original purchase date (e.g., sales receipt or original invoice) is required for this limited warranty to apply. CREE SHALL NOT BE LIABLE TO BUYER, OR TO ANYONE CLAIMING UNDER
BUYER, FOR ANY OTHER OBLIGATIONS OR LIABILITIES, INCLUDING, BUT NOT LIMITED TO, OBLIGATIONS OR LIABILITIES ARISING OUT OF BREACH OF CONTRACT OR WARRANTY, NEGLIGENCE OR OTHER TORT OR ANY THEORY OF
STRICT LIABILITY, WITH RESPECT TO THE PRODUCTS OR CREE’S ACTS OR OMISSIONS OR OTHERWISE. This limited warranty does not cover the cost of field labor or expenses related to the repair or replacement of the Product. Cree reserves the
right to utilize new, reconditioned, refurbished, repaired or remanufactured products or parts in the warranty repair or replacement process. Such products and parts will be comparable in function and performance to an original product or part, as determined
by Cree in its sole discretion, and warranted for the remainder of the original warranty period. This limited warranty applies only to a Product purchased within the United States (including the lower 48 states, the District of Columbia, Hawaii, Alaska, Puerto Rico
and the U.S. Virgin Islands, but excluding APO/FPO addresses that are outside of those named jurisdictions) (collectively, the “Territory”). Replacement and repaired Product or parts will only be shipped to addresses within the Territory, and refunds will only be
credited to accounts located within the Territory. Making a Warranty Claim: Notice of any warranty claim should be sent to Cree at the following address: 9201 Washington Avenue, Racine, WI 53406 or you may call Cree at (800) 236-6800 to receive a RGA#
and instructions for return of the Product, freight prepaid. Further Limitations: TO THE EXTENT PERMITTED BY LAW, THE LIMITED WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES AND
REMEDIES (INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE). IF WE CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE
EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES WILL BE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS LIMITED WARRANTY AND TO REFUND, REPAIR OR REPLACEMENT SERVICE AS DETERMINED BY CREE IN ITS
SOLE DISCRETION. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. IN NO EVENT SHALL CREE BE LIABLE FOR INCIDENTAL, COMPENSATORY, CONSEQUENTIAL, INDIRECT,
SPECIAL OR OTHER DAMAGES. CREE’S AGGREGATE LIABILITY WITH RESPECT TO A DEFECTIVE PRODUCT SHALL BE LIMITED TO THE MONIES PAID TO CREE FOR THAT DEFECTIVE PRODUCT. Some states do not allow the exclusion or limita
-
tion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This limited warranty gives Buyer specific legal rights, and Buyer may also have other rights which vary from state to state. Effective Date: January 1, 2013
www.cree.com/lighting
