Step 2: Connect to gas supply
1. The inlet to the appliance is ISO 7
- Rp
1
⁄
2
” internal thread situated
towards the top right hand rear
corner.
2. Fit the bayonet connection to the
wall in the shaded area as shown.
The shaded area shown is
applicable to installations in
minimum depth cabinets.
If more room is available, the
bayonet fixing area can be
extended, provided that the
flexible tube does not obscure the
fan intake.
3. Use a 900mm - 1125mm length of
flexible connector. The flexible
connector shall be fitted such that
it cannot come into contact with a
moveable part of the housing unit
(eg; drawer) and does not pass
through any space susceptible of
becoming congested. Make sure
that the flexible connector does not
block the cooling fan inlet.
4. Flexible connections should be to
BS669. Parts of the appliance
likely to come into contact with a
flexible connector have a
temperature rise less than 70°C.
5. Parts of the cooker likely to come
into contact with the flexible hose
have a temperature rise less than
70˚C.
6. Rigid connections must be accessible
to disconnect for servicing. Cut a
150mm square hole in the right
hand rear corner of the support
shelf for the supply pipe.
7.
Make sure all connections
are gas sound.
24
Rear
Wall
60 mm
60
mm
60 mm
square
Installation Instructions
When you are cooking, keep
children away from the vicinity
of the appliance.
This product is designed as a domestic
cooking appliance for the preparation
and cooking of domestic food
products, and should not be used for
any other purpose.
■
Remove all packaging from the
appliance before using for the
first time.
●
Make sure you read and
understand the instructions before
using the appliance.
●
Keep electrical leads short so they
do not drape over the appliance
or the edge of the worktop.
●
Keep all flammable materials (such
as curtains, furnishings & clothing)
away from the appliance.
●
Parts of the appliance may be hot
during or immediately after use. Allow
sufficient time for the appliance to
cool after switching off.
●
Do not drape tea towels over the
flue vents or doors, as this creates
a fire hazard.
●
Do not use aluminium foil to cover
the grill pan, or put items wrapped
in foil under the grill, as this
creates a fire hazard.
●
Never use the appliance for
heating a room.
●
Do not use the oven with the door
inner glass panel removed (glass
oven doors only).
●
Always use oven gloves when
removing hot food / dishes from
the oven or grill. The oven / grill
and utensils will be very hot when
in use.
●
When opening the appliance
door, take care to avoid skin
contact with any steam which may
escape from the cooking.
●
Do not use foil on oven shelves or
allow it to block the oven flue, as
this creates a fire hazard, and
prevents heat circulation.
●
When cooking heavy items - eg;
turkeys - do not pull the oven shelf
out with the item still on the shelf.
●
Switch off the electricity supply
before replacing the oven light bulb
to avoid the risk of an electric shock.
All installation, servicing and
maintenance work must be carried out
by a competent person who will
comply with current Regulations,
Standards and Requirements.
Warning:
This appliance must be
earthed.
When you have finished
cooking check that all controls
are in the off position.
As with all gas appliances, it is
recommended that your appliance is
serviced regularly.
5
Be Safe - Not Sorry
