background image

- 7 -

Technical information for the fitter

Electrical connection

The electrical safety of this appliance can only be guaranteed if the latter is correctly and efficiently earthed, in

compliance with regulations on electrical safety. Always ensure that this vital safety measure has been taken. If you
have any doubts, call in a qualified technician to check the electrical system thoroughly.

The manufacturer denies all responsibility for damage resulting from a system which has not been earthed correctly.

Before powering the appliance, check whether the technical characteristics featured on the appliance data plate

correspond with those of the mains electrical system.

Check that the current load of the mains supply and of the power sockets is suitable for the maximum power of the

appliance, indicated on the appliance data plate. If in doubt, contact a qualified professional.

Important notes

Your hob is delivered together with a specific power supply cable.  Should this cable be damaged, call your nearest After-
Sales Service Centre for its replacement.
Disconnect the appliance from the electricity supply before all operations.

You can connect your hob to the electrical system in two different ways:

1. use a socket conforming to the regulations in force in the country where the appliance is fitted and accessible
when necessary. Do not use adaptors or multiple sockets, nor extensions.
2. or by means of a junction box: if the appliance is connected permanently to the mains, an omnipolar circuit
breaker
, accessible if necessary, with a minimum contact opening of 3 mm should be installed.

FRONT RIGHT MOUNTING

FRONT LEFT MOUNTING

SEAL MOUNTING

FRONT / REAR

RIGHT / LEFT

MOUSSE 5x8 mm

HOB UNIT FAST DOWN

REAR RIGHT MOUNTING

WORK 
SURFACE

REAR SPRING ASSEMBLY

FRONT OF THE HOB UNIT

30

40

REAR LEFT MOUNTING

Summary of Contents for S910E













Reviews: