Creda CAR 033 Operating Instructions Manual Download Page 6

This guide is for quick reference only.  

Please refer to the operating section for further information.

How Does the Heater Control Work?

The control allows you to choose when you want heat and at what temperature. 

When using a timer mode (see below), 

Comfort On

 will display on the home screen to tell you 

when the heater is maintaining  the temperature displayed. 

Comfort Off 

will display when the 

heater is outside of a timed heating period. When 

Manual

Eco

 or 

Frost

 modes are being used 

the heater will always maintain the temperature shown on the home screen.

Set the Time

To set the date and time on the heater, press 

Menu

, then press the 

Enter

 with 

Time / Date

 

highlighted. Press   or   until the correct value is shown, then press 

Enter to confirm and move 

on to the next value. Repeat until all details are correct, and Set

 displays, then press 

Back

The time is automatically adjusted in spring and autumn between Greenwich Mean Time (GMT)

 

and 

British Summer Time (BST)

.

Set the Temperature

The temperature shown on the display is the room temperature set point. This is the temperature 

that the heater will maintain during the heating periods. If the room temperature is above this 

temperature then the heater will not operate. The heater leaves the factory with this temperature 

set at 21°C which represents a typical, comfortable room temperature. If you require a different 

room temperature then press either   or   until the display shows the temperature you require.

Quick Start Guide

Child Lock

If you need to lock the controls so that the settings 

cannot be changed then activate the 

Child Lock

To lock the controls press and hold both the 

Back

 

button and 

Enter

 for three seconds. 

Child Lock

 will 

appear at the bottom of the screen. To unlock the 

control repeat the action by pressing both the 

Back

 

button and 

Enter

 for three seconds.

Timer Mode

Description

Out All Day

6 hours heating per day in two periods

Home All Day

13 hours heating per day in one period

Holiday

Set the temperature and number of 

days for which you are on holiday

User timer

Customise times in four periods

Child Lock

Comfort off

12:00

Timer Modes

Your Creda Aluminium Radiator 

comes pre-programmed with four 

timer modes. These modes define 

the periods when the heater will 

operate in 

Comfort On

 mode. 

The four available modes are 

illustrated in the adjoining table.

6

Summary of Contents for CAR 033

























Reviews: