10
4
Double Digit Codes
The numbers 6, 7, 8 and 9 can be entered by pressing two keys simultaneously in order
to produce a sum. For example 2 and 4 can be pressed simultaneously to produce the
number 6 (2+4=6). Note, if the code was programmed using 2+4 as the 6 digit, the 2+4
must be used when accessing the lock, because other combinations that equal six such as
1+5 are distinguished from 2+4.
5
Switching Modes
Note: The Master Code is retained when switching modes
1.
Unlock the MicroCool™ Digital Lock and turn the knob to the unlocked position
2.
Remove the battery for 10 seconds
3.
While holding the program button, reinsert the battery and was until all 3 LED’s fade
in and fade out simultaneously
4.
Release the program button
5.
Enter the 6 digit master code. When the master code is entered correctly the yellow
LED will illuminate
6.
Press button number 2 – two times for LOCKER Mode
7.
Once the lock switches modes, the LED’s will flash
green
,
yellow
,
red
8.
Proceed to operate the lock in the selected mode
