Creavit ES2210, Installation Instruction

Page: 7 / 12

DESCRIPTION MALFUNCTION CAUSE TREATMENT
no water out
the battery is exhausted(DC item) change the battery
water supply cut off check supply
dirt in the filter clean the filter
water pressure is too low raise the pressure
water will not turn off dirt on the sensor window clear the dirt
too little water flow
water supply is turned too small adjust water supply
the filter is too dirty clean the filter
water pressure is too low raise the pressure
too much water flow water supply is turned too high adjust supply
water pressure is too high adjust pressure
short cycles of battery incorrect batteries change to 4AA alkaline battery
the indicator
light is not on
the light is broken change the light or circuitry board
the circuitry board is wet or signal line is wet dry out
the battery is exhausted change the battery
poor connection of battery check the battery connection
MALFUNCTION & DISPOSAL
ES2210.indd 7 04/11/16 16:26