Model No.
CRT-591-M
SPECIFICATION
Date
2013/07/02
Ver.
1.0
Card Issuing Machine
Page
10/12
9.
Card instruction
Default card thickness set in Ex-work is 0.8mm， range is ：
0.71～1.0.
Note：
（1）MTBF in above table is based on standard card testing；
（2）
Ignore the thickness of embossed card if emboss is complied with ISO standard. And embossment is
always on the top and keeps to right of stacker (the shutter is on the forth) when issuing embossed cards
.
10.
Maintenance
After a long time usage, factors such as the machine’s transportation mechanism wear and tear,
dust on sensor, magnetic head, IC card contact will influence the performance of the machine, and
hence it should be maintained on a constant basis.
Detail maintenance instruction is as following:
①
Use a cleaning card or a cloth with alcohol to clean the card dispensing mechanism and card
read/write mechanism. (To open the card read/write components please refer to chapter
12”Cautious”)
②
Pick out greasy card and deformed card, and clean the greasy card with soft cloth tapped
cleaning alcohol. If the deformed card is unable to restore, it is necessary to replace this deformed
card with normal one.
③
Keep card pre-empty sensor clean by soft cloth with cleaning alcohol.
④
Sensor maintenance: Use the sensor status inquiry command to examine sensors’ status.
When the reader is running under good condition, all its 10 sensor groups’ status are ‘OFF’; If any
