CREATOR CHINA 2014-07 WWW.CREATOR1997.COM
2
CR-iMAX901HD Multiple Signals Scaler User Manual
Chapter Two System Introduction
2.1 Panel instructions
Front panel:
Rear panel:
1
LCD display
Display the current status of output screen and
operating information.
2
SENSOR——infrared receiver
Use with the dedicated remote control of
CREATOR.
3
INPUTS SELECTION——input source type,
input audio channel selection keys
It is used to select the input source type.If you
need to select VGA1 source signal input, you
need to press the corresponding button, similarly,
if you need to select 1-10 channel input audio
signal source, just press the corresponding
button.
4
AV——video/ audio setting button
If you need to select the video input signal from
the INPUTS SELECTION, you must set the
current state of switching the video through AV
firstly; if you need to select the audio input signal,
you must set the current state of switching the
audio through AV. AV button lights, INPUTS
SELECTION select the audio input signal.
5
MUTE——normal audio/ silent mode
MUTE button light is silent mode, MUTE button
lights off is normal mode.
The silent mode set by the MUTE button
is invalid to the DisplayPort interface input
audio signal.
6
SETUP
MENU——Menu setting button
With this button,you can enter the LCD menu
to set the corresponding function
ENTER——OK
The OK button to set the MENU function
7
PARAMETER——check knob
Cooperate with MENU settings,to be as a menu
direction arrow.
