Creator
OBDII/EOBD scanner
24
Press [
][
] to select, [
] and [
] to Page, and press
[
] to confirm.
5.1 Read Trouble Code
◆Reading Codes can be done with the key on
engine off (KOEO) or with the key on engine
running (KOER).
◆Stored Codes are also known as “hard codes”
or “permanent codes”. These codes cause the
control module to illuminate the malfunction
indicator lamp (MIL) when emission-related
fault occurs.
◆ Pending Codes are also referred to as
“maturing codes” or “continuous monitor
codes”. They indicate problems that the
control module has detected during the current
or last driving cycle but are not considered
