8
4.3 Measure Target Temperature
Adjust the position of the thermal imaging camera so that the image
of the object moves to the cross temperature measurement point on
the screen. The "*=××" (* indicates the number value of temperature
measurement points 1, 2, 3, and 4) is the temperature of the target at
the point. To ensure accurate measurement, long press the
confirmation key until the upper left corner of the LCD prompts
"correction" characters before measuring.
When the target object is too small or the highest temperature point
cannot be judged, area temperature measurement can be used. For
detailed operation, please refer to
Temperature Measurement-
Area temperature measurement.
If users want to measure the temperature on multiple targets on the
screen or use multiple methods for temperature analysis, users can
press the button to freeze the image, and then use multi-point
temperature measurement, area temperature measurement or line
temperature measurement to analyze, if users need to return to real-
time on the temperature measurement interface, just click the
button again.
In the standard temperature range (30~45
℃
, i.e. 86~113
℉
), if the
target temperature is higher or lower than the upper or lower
temperature corresponding to the device's temperature range, the
device will display <28
℃
(82.4
℉
) or > 47
℃
(116.6
℉
) to remind
the user.
4.4 Infrared Image and Voice Annotation
Quick operation: To save the infrared image, long press the
Shutter
button and the
Voice
dialog box appears, select
Cancel
, then press
button, only image files are saved at this time; select the
Record
button and then press
, both image and voice files are saved
(Three modes can be selected according to the severity level of the
fault: general defect, serious defect and critical defect).
Click
button to open
Main Menu > File > Storage
, you can set
up the same functions as shown in the
Quick operation
.
The maximum voice recording time for a single thermal image is 40
seconds. During the voice recording process, press the
Cancel
button to stop recording.
Summary of Contents for Artemis TI-CS-T1
Page 38: ...34 Case 3 ...
