Creative WebCam NX Ultra, User Manual

Page: 12 / 32

Installing Creative WebCam NX Ultra 1-2
Installing
Creative
WebCam NX
Ultra Follow the installation procedures for your operating system.
In Windows 98/98
SE /Me/2000/ XP
1. Do not connect Creative WebCam NX Ultra to your computer before installing
the drivers. If you accidentally begin installation with Creative WebCam NX
Ultra connected, the Add New Hardware Wizard or Found New Hardware
Wizard dialog box appears. Click the Cancel button and disconnect the
WebCam from your computer.
2. Insert the Creative WebCam NX Ultra Installation CD into your CD-ROM drive.
If it does not run automatically, click Start -> Run and type
d:\ctrun\ctrun.exe (replace d:\ with the drive letter of your CD-ROM drive).
3. Click the options for installing drivers and applications.
4. Follow the onscreen instructions to complete the installation.
You may be asked, after an application is installed, if you want to restart your
computer. Select No until all the drivers and applications are installed.
5. Place your Creative WebCam NX Ultra on top of
your computer monitor or other flat surface. For
LCD flat panel monitors or notebook computers,
use the integrated hinged lever to balance the
camera. See Figure 1-2.
Figure 1-2: Placing your WebCam
on your computer
Hinged
lever