PN: 03SB181000001 Rev A
EQ for SXFI*
*Only available when Super X-Fi is enabled
EQ – Off
Press to cycle through EQ modes.
When Super X-Fi is disabled, users may
select from three different EQ modes by
pressing the Mode button. When Super
X-Fi is enabled, only EQ for SXFI Mode is
available.
Users may also customize and assign
their own EQs to any of the EQ modes
on Sound Blaster Command software to
better suit their preference.
Mode Button
3
Mode 3 – Footsteps Enhancer
Direct Mode (Press and hold)
Mode 1 – Music
Mode 2 – Movies
LED OFF
GREEN
WHITE
PURPLE
BLUE
ORANGE
Headphone Output: Super X-Fi – On
Line-out (Speaker)
Press and hold to switch between Line-
out (Speaker) and Headphone Output.
When in Headphone mode, press once
to enable / disable Super X-Fi.
Set up your Super X-Fi profile by
following the instructions provided
under “Setting Up Super X-Fi”.
Super X-Fi Button
4
Headphone Output: Super X-Fi – Off
LED OFF
GREEN
ORANGE
Audio Source – SPDIF Interface
Audio Balance – On
Press and hold the Microphone Control
Button to enable / disable Audio Balance.
Turn the knob clockwise to listen to
Speaker’s output while reducing SPDIF
Interface’s volume. Turn the knob anti-
clockwise to listen to SPDIF Interface’s
output while reducing Speaker’s volume.
Subsequently, press the Volume Control
Knob once to reset the balance.
Audio Balance Feature
5
Audio Source – Line-out (Speaker)
GREEN
ORANGE
CYAN
