![background image](http://html.mh-extra.com/html/creative/sound-blaster-evo/sound-blaster-evo_manual_2680687006.webp)
Using Your Sound Blaster EVO Wireless 5
Using Your Sound Blaster EVO Wireless
Set up your headset in four simple steps:
1. Charge Your Headset
2. Install the Software
3. Pair the headset with your NFC / BT devices
OR
4. Connect the headset to your computer / mobile device
Step 1 : Charge Your Headset
You are recommended to charge your headset for 8 hours before it is used for the first time. Connect
your headset to your computer using the MicroUSB-to-USB cable, or connect it to a power supply via
an adapter (available separately). The LED flashes red when charging.
Using Your Headset While Charging
During subsequent charges, you can use your headset while it charges. The LED will light in red while
charging and return to its last status when fully charged.
You can also check the status of the battery via the battery indicator at the top right corner of the
Sound Blaster EVO Control Panel. Please refer to
Using the Software
for details on this software.
Note:
The low battery tone will start beeping to inform users of its status 15 minutes before the
headset is completely powered off.
Summary of Contents for Sound Blaster EVO
Page 1: ......