Installing PC-CAM 600 1-11
In Windows 2000
1. Do not connect PC-CAM 600 to your computer before installing the drivers.
If you accidentally begin installation with PC-CAM 600 connected, the Found New
Hardware Wizard dialog box appears. Disconnect PC-CAM 600 from your computer and
then click the Cancel button.
2. Insert the PC-CAM 600 installation CD.
3. Click the names of the drivers and applications you want to install on your computer.
4. Connect PC-CAM 600’s USB cable to an available USB port on your computer.
5. Place PC-CAM 600 on top of your computer monitor or another flat surface.
6. Two Digital Signature Not Found dialog
boxes appear one at a time, telling you that
Creative PC-CAM 600 (Still Image)
(Figure 1-6) and Creative PC-CAM 600
(Video) have been detected.
7. Ignore the messages and click the Yes
button for each dialog box.
Figure 1-6: Digital Signature Not Found dialog box.