22
5.3
LinK Tips and Tricks
How to identify which speaker is the LEFT, CENTER, RIGHT speaker.
• Press and hold the Power ON/Standby button located at the rear of the speaker.
The Link LED indicator will light its respective LED Channel it was configured for.
My LEFT and CENTER Channel D5x does not respond to my actions on either buttons or
Bluetooth
connections when they are in LINK mode.
• This is normal. The D5x in slave mode does not respond to any button (except the Power
ON/Standby to indicate the identity of the speaker via LED indication) as they are receiving
cues from the RIGHT Master speaker. This includes
Bluetooth connection, AUX-IN input and
the Volume Touchpad.
Can I add more speakers or remove speakers from a 2.1 Setup?
Yes you can. However you would need to clear the link system on all the speakers and subwoofer and
re-link them again. Please refer to section 4.3 Reset to factory setting / clear Link system and section
2.1 or 2.2 to reconfigure your system again. For operations on the ZiiSound DSx wireless subwoofer,
please refer to its user manual for more information.
I cannot re-connect my speakers together. All that is shown is all the LEDs blinking in unison and
going off after 1 minute. What should I do?
This is an error indicator to indicate that one of the links are not present in the defined previous setup.
There are 2 ways to troubleshoot.
a) Power ON all your speakers and press the LINK TouchPad / Button again to attempt to link
the speakers together. Ensure that the Subwoofer have their mains Powered ON.
b) Return to factory default settings to clear Link system configuration for all your speakers
and subwoofer involved and re-link them again.
(Slave/Master*)
Center Speaker
(Master)
Right Speaker
(Slave)
Left Speaker
Not Configured
Link LED Status
Indicator
Summary of Contents for MF8115
Page 1: ...1 Model No MF8115...