3-1 Setting Up Your Camera
3
Setting Up Your Camera
This chapter tells you how to quickly install Creative
DiVi CAM428, as a Mass Storage device. Follow the
installation procedures for your operating system.
Installing the
Camera
Driver
1. Do not connect your camera to your computer
before installing the drivers.
If you accidentally begin installation with your
camera connected, the
Add New Hardware
Wizard
or
Found New Hardware Wizard
dialog
box may appear.
If you are using Windows 98 SE, click the
Cancel
button. For other operating systems, follow the
instructions on the screen and disconnect your
camera from your computer.
2. Insert the installation CD into your CD-ROM or
CD-ROM/DVD-ROM drive. Your CD should start
automatically. If it does not, follow the steps
below:
i.
Double-click the
My Computer
icon.
Alternatively, click
Start
→
My Computer
.
ii. Right-click the CD-ROM/DVD-ROM drive icon,
and then click
AutoPlay
.
3. In the Software Installer
screen, click
Driver
→
Install
. The
Choose Setup Language
window
appears.
4. Select the desired language, then click the
OK
button.
5. Click the
Next
button to continue. Follow the
instructions on the screen to complete the
installation.
6. Click the
Finish
button to complete the driver
installation.
7. Follow the instructions in “Setting up Your Camera
as a Mass Storage Device” on page 3-2 to connect
your camera to your computer.
You do not have to restart your computer after
installing the driver.
DiViCam428.book Page 1 Friday, August 26, 2005 10:55 AM