Installing Hardware 1-6
For analog CD audio output:
connect the Analog CD audio cable from the Analog
Audio connector on your CD-ROM/DVD-ROM drive to
the CD_IN connector on the Sound Blaster Audigy
For digital CD audio output:
connect the Digital CD audio cable from the Digital
Audio connector on your CD-ROM/DVD-ROM drive to
the CD_SPDIF connector on the Sound Blaster
Audigy card as shown in Figure 1-5.
Step 4: Connect to
power supply
1. Replace the computer cover.
2. Plug the power cord back into the wall outlet, and turn on the computer.
To connect your Sound Blaster Audigy card to other devices, see “Connecting
Related Peripherals” on page 1-7.
To install drivers and software, refer to “Installing Drivers and Applications” on
Figure 1-5: Connecting the
drives.
CD-ROM/DVD-ROM drive
OR
If the Sound Blaster Audigy
card is connected to both
the CD SPDIF and CD Audio
connectors on a CD-ROM or
DVD-ROM drive, do not
enable the CD Audio and CD
Digital options at the same
time in Surround Mixer.
