Setting Up Your CD-R Drive 2-5
5. Insert your CD-R drive into the vacant drive bay as shown in
Do not slide the drive completely into the vacant drive
bay. Leave some space at the rear so that it is easier for
you to connect cables to your drive.
You may need to use some force to insert your CD-R
drive into your drive bay. However, please refrain from
excessive force as this may damage your drive or other
devices on your system.
Connecting Cables to Your Drive’s Rear Panel
To connect all the necessary cables to the rear panel of your CD-R
drive:
1. Locate an unused power cable from your system.
A power cable can be located from your system’s power supply
unit. The power supply unit is located at the right hand corner
of most systems.
Figure 2-6: Inserting your CD-R drive.
