Creative CB2530, User Manual, Page: 8 / 48

Digital Wireless Headphones CB2530 CLA_Eng only.fm Page 6 Tuesday, January 25, 2005 4:39 PM
3. Switch on your headphones. The POWER LED lights up in red. The Bluetooth LED
lights up in blue.
When the Bluetooth LEDs on your audio ad
a pter and headphones blink, the devices are
paired and connected.
• You can pair the headphones and audio adapter before or after connecting the audio
adapter’s minijack to the headphone jack.
• Make sure that your headphones are within the working distance of the audio
adapter. When the headphones are out of working range, the Bluetooth LED on both
the headphones and the audio adapter remains lit in blue.
• To reconnect the headphones and the audio adapter, bring the two devices closer.
• When battery levels are too low, during the last 10 minutes before your headphones
turn off,
• the POWER LED blinks red.
• your headphones beep every 30 seconds.
• Pairing your headphones with a new device can take up to 15 seconds. Subsequent
pairing with the same device will take significantly less time.
6