Setting Up a Bluetooth Connection 3-5
3. In the
Device Properties
box, check the device status and device address.
The device should be working properly and the device address should match
the Bluetooth device address (BDA), found on a label on your USB Adapter
Pairing Your
Bluetooth
Devices
1. On your taskbar, double-click the
Bluetooth
icon.
The
My Bluetooth Places
window appears.
2. Double-click the
Find Bluetooth Devices
icon.
For Windows XP only
:
In the
Bluetooth Tasks
box, click
View devices in
range
.
3. In the
Entire Bluetooth Neighborhood
dialog box, double-click the
Creative Modem Blaster Bluetooth
icon.
The
Bluetooth PIN Code Required
pop-up message appears as shown in
• Make sure your
modem is turned on
and the interface
switch is pushed
towards the
BT
symbol.
• You can also pair
your USB Adapter
with other remote
devices using
Bluetooth wireless
technology. Refer to
the device’s user
guide for
instructions.
Figure 3-5
Summary of Contents for Blaster CB5722
