Stereo Direct / Bit Accurate Settings
Enabling Stereo Direct / Bit Accurate mode allows you to play back audio data directly from the source
without any audio enhancements or modifications.
Enabling Stereo Direct / Bit Accurate mode
1. On
Sound Blaster Audigy 5/Rx Control Panel
, click the
Speaker & SPDIF I/O
tab. Ensure
that the
Speaker/Headphone Selection
is set to
2/2.1 Speakers.
2. Click the
Stereo Direct/Bit Accurate
tab.
3. Click the
Enable Stereo Direct/Bit Accurate Playback
checkbox.
4. Go to
Control Panel (Windows)
>
Sound
>
Playback
tab. Select
Sound Blaster Audigy 5/Rx
>
Properties
>
Advanced
tab. Ensure that the
Default Format
is set to
24 bit, 192000 Hz (Stu-
dio Quality)
.
5. Start your audio playback.
Notes
1. Stereo Direct / Bit Accurate mode is only applicable to WAV files with the following specifications:
l
Stereo format
l
PCM audio data
l
16-bits and above
l
44.1, 48, 96 or 192 kHz
2. Once Stereo Direct / Bit Accurate playback starts, the digital output sampling rate is automatically
set to the current playback's sampling rate.
3. When Stereo Direct / Bit Accurate mode is applied to the playback, adjusting the volume control or
applying EAX effects will not have any effect on digital output signals.
Using Your Sound Blaster Audigy 5/Rx Control Panel 33
Summary of Contents for audigy Rx
Page 1: ...1 ...