Installing Creative TravelSound MP3 3-2
6. Connect your player’s USB cable to an available USB port on your computer
(Figure 3-1). Place your player on a flat surface.
Windows automatically detects the device. The orange LED indicator lights up
to show that your player is in USB mode.
i. If you are prompted to insert the Windows 98 SE CD, replace the
Installation CD with the appropriate CD.
ii. In the
Insert Disk
dialog box, click the
OK
button.
iii. Follow the instructions on the screen.
7. Click the
Finish
button, and then restart your computer if you are prompted
to do so.
• You can safely install
your player with your
computer turned on.
• The USB port(s) on your
computer may be found
on the front panel
instead of the back
panel.
• You can daisy-chain your
player through another
USB device or attach it
to a self-powered USB
hub.
Figure 3-1: Connecting your player to your computer
USB port
To test the installation,
see “Verifying
Installation in Windows
98 SE/Me” on page 3-3
and follow the
instructions.
Summary of Contents for 51MF5045AA000 - Travelsound 250 Speaker System
