![background image](http://html1.mh-extra.com/html/creative/3d-blaster/3d-blaster_user-manual_2681330015.webp)
3D Blaster GeForce2 GTS Installation Guide 9
To install in
Windows 98
1. Switch on your system.
Windows 98 automatically detects the graphics card.
An Add New Hardware Wizard message box appears, informing you that a display adapter
has been detected.
2. When a dialog box similar to Figure 7
appears, select the option Display a list of
all the drivers in a specific location, so
you can select the driver you want.
3. Click the Next button.
4. Insert the 3D Blaster GeForce2 GTS CD
into your CD-ROM drive.
5. In the Models list box, click the Have Disk
button.
6. In the Install From Disk dialog box, type
D:\GRAPHICS\ENGLISH\WIN9XDRV
(where D: represents your
CD-ROM drive) and click the OK button.
If you are installing 3D Blaster GeForce2
GTS as a second or subsequent card to
make use of Windows 98’s multi-monitor capability, you will see an Update Driver
Warning message telling you that the driver you have selected may not work correctly. You
must click the Yes button to confirm that you want to use the selected driver. Otherwise, the
system will install the wrong driver and will not recognize the card as a 3D Blaster GeForce2
GTS card (for details, see “Windows 98 Multi-Monitor Display Problems” on page 21).
7. In the Models list box of the Select Device dialog box, make sure the Creative GB0010
entry is selected and click the OK button.
8. Click the Next button.
Figure 7: Selecting the option Display a list of all the
drivers in a specific location, so you can
select the driver you want.
Summary of Contents for 3D Blaster
Page 1: ...User s Guide...