Technical Specifications
0202 USB 2.0 Owner’s Manual
31
TECHNICAL SPECIFICATIONS
General
Sample Rates:
44.1, 48, 88.2, 96, 176.4, 192kHz from internal crystal
(no sample rate conversion)
Bit Depth:
24-bit I/O, 32-bit processing
USB 2.0 Hi-Speed
Full 24-bit resolution at all sample rates
2in/2 out channels
Zero-latency direct hardware monitoring
ASIO2, WDM MME
Anti-Pop speaker protection minimizes noise during power on/off
Ultra-low jitter clock subsystem
<500ps RMS in PLL mode (48kHz, Coaxial S/PDIF Sync)
Combo Microphone Preamplifier/Hi-Z/Line Input (1)
Type:
Balanced E-MU XTC
®
combo mic preamplifier and Hi-Z/line input
A/D converter:
AK5385A
Input Impedance:
2.5Kohms
Max Level:
+6.6dBV (+8.8dBu)
EIN:
(20Hz-20kHz, 150ohm, unweighted) -127dBu
Signal-to-Noise Ratio:
(A-weighted, min gain) 113dB
THD+N:
(1kHz at -1dBFS, min gain) -103dB (.0007%)
Gain Range:
+60dB
Frequency Response:
(min gain, 20Hz-20kHz) +0.0/-0.16dB
Stereo Crosstalk:
(1kHz min gain, -1dBFS) < -110dB
Hi-Z/Line Input (1)
Input Impedance:
1Mohm
Max Level:
+12dBV (14.2dBu)
Dynamic Range:
(A-weighted, 1kHz, min gain) 113dB
Signal-to-Noise Ratio:
(A-weighted, min gain) 113dB
THD+N:
(1kHz at -1dBFS, min gain) -101dB (.0009%)
Summary of Contents for 202
Page 1: ...Owner s Manual Owner s Manual ...
Page 4: ...E MU Systems 4 ...
