Assembly
MODEL PS10CLASB & PTCLASB
19771-100 Rev H (05-20)
© Copyright 2010, Creative Playthings. Printed in U.S.A.
Page 5
MAINTENANCE INSTRUCTIONS
Re-staining Information:
(Your Play Set is stained at our factory. No stain is needed at initial assembly.)
• Pigmented, exterior, water repellent stains are recommended and will provide an excellent barrier against moisture
without hiding the natural wood grain or leaving a film that may later crack or peel.
• We recommend that you apply stain according to the instructions and precautions provided by the stain manufacturer.
• It should take one or more quarts to cover your set.
• Contact your local dealer or call Creative Playthings for our staining products.
• Do not paint, or varnish rungs or steps.
• Avoid using finishes that create slippery surfaces.
Maintenance:
• Wooden playground equipment will last for years with proper maintenance. Maintenance of the Play Set finish will
vary depending on weather climate.
• As a safety precaution, check all hardware, such as nuts and bolts, for tightness twice a month during use and at the
beginning of each play season. Tighten as required and specified in these instructions. Do not over-tighten.
• Check structure twice monthly during usage for any evidence of deterioration. If upon inspection, hardware has sharp edges,
rusted or structural pieces have signs of premature failure; replace them through Creative Playthings Customer Service.
• Oil all metallic moving parts monthly during the usage season.
• The swings, trapeze, tent, rope ladders, and any other removable plastic accessories should be removed and taken
indoors when outside temperatures drop below 32° F (0° C).
• Wood will expand and contract as it adjusts to temperature changes and varying moisture conditions. Checks or cracks
are a natural characteristic of all wood and will not affect the strength or durability of the wooden components.
• To maintain the finish of your set, a light sanding and an application of an exterior stain will repair scratches and prevent
wood from aging prematurely.
• The wood parts of your Play Set should never be disposed of by burning.
• Dispose of all parts so as not to create a hazard.
• "Check all coverings for bolts and sharp edges and replace when required."
• "Check swing seats, chains, ropes, and other means of of attachments for evidence of deterioration". Replace through
Creative Playthings Customer Service.
Tools & Materials Suggested for Assembly:
• Claw Hammer
• Carpenter’s Level
• Box Wrench or Sockets (7/16" & 1/2")
• Driver Drill (Medium Phillips)
• Locking Pliers
• 10 ft. Tape Measure
• 6 ft. Step Ladder
• Beeswax or Soap (Used to lubricate screw threads)
Hex Bolt & Weld Nut Assembly:
Align the holes in the parts to be fas-
tened. Start preliminary tightening of
bolt into weld nut by hand. Tighten each
bolt with a wrench until the lock washer
is fully compressed between the head
of the bolt and the flat washer.
Correct Assembly:
Bolt has been screwed securely into
weld nut and the connection is tight.
Check connections periodically for
tightness during the life of the Play Set
. Do not over tighten.
Incorrect Assembly:
During assembly or maintenance the bolt
protrudes 1/8" past the weld nut. Call cus-
tomer service or replace the bolt at a local
hardware store. You may be overtighten-
ing or using the wrong size bolt. Failure
to replace this bolt with a shorter one
could result in serious injury.
