Classic Pine Monkey Bar Instructions - 19932-200A (09/17)
Copyright 2016, Creative Playthings - Printed in U.S.A.
Page 4
STEP FIVE - Mount to Clayton
Parts omitted for clarity.
Wall
Support
This post has a seam
that interferes with
mounting directly to the
post
STEP FOUR - Mounting Blocks
For Clayton gym fasten one Mounting Block (A) and one L-
Brace (G) to each rail of the Top Ladder as shown at right.
Note the position of the holes on the edge of the Mounting
Blocks. Use 5/16 x 3" Hex Bolt Assemblies through the Rail,
the L-Brace, and the Mounting Block. Use 5/16 x 1-1/2" Hex
Bolt Assemblies to secure each L-Brace to the Mounting
Block and the Top Ladder Rail.
For Northbridge gym, fasten a Mounting Block and L-Brace
to only one rail of the Top Ladder. Leave open the side ad-
jacent to the gym corner post.
For non-standard installations, if the Monkey Bar is to be
mounted adjacent to a corner post omit the Mounting Block
on that side, unless the post has a seam that will interfere
with mounting hardware.
A
A
G
C
For Northbridge gym do not
attach the Mounting Block & L-
Brace adjacent to the post.
If the Monkey Bars will not to be mounted to the Corner Post,
use this step. To mount to a Corner Post see the next page.
Lift the Monkey Bar in position as shown below, with the Mount-
ing Block tight against the Wall Support. Adjust the position of the
wall slat, if needed.
Mark the position of the holes in the Mounting Block onto the
Wall Support. Drill 3/8" diameter holes through the Wall Support
at the marks.
Secure using four 5/16 x 4-1/2" Hex Bolt Assemblies as shown.
