Createbot MAX, Instruction

Page: 6 / 15

Click “TOOL”, then choose “FILAMENT” and click “DOWN” to extrude the filament. If it is
extruded normally and smoothly, click “Stop” to finish it and click “BACK” to return to home
page.
Extruding Test
Step3
。
Step4
Clip of the glass platform
5
Well assembled
Direction of insert
Take out the glass platform from the box of accessories. Then push it until it reaches to the end of heated
bed. Finally, fix it with the glass clip in front of heated bed. (Please note: after installing the glass platform,
click “TOOL” and choose “LEVEL” to level the platform. Adjust the distance between nozzle and platform
to the thickness of one A4 paper by rotating the corresponding screw under the platform.)
Tool Menu
Load and unload the filament