4. Connect terminal to corresponding interface on motherboard
according to the cable label(Terminals without labels are redundant
and do not need to be connected to motherboard. Please disconnect
printer power when wiring). Then connect the other end of the cable
to Sprite Extruder Pro.
按排线线标将对应端子接在主板相应位置(无线标的端子为冗余,无需接在
主板上,接线时请断开机器电源)。然后再将排线另一端连接到 Sprite
Extruder Pro。
E-motor/E电机
E-motor/E电机
Hotend Therminstor
喷头热敏电阻
Hotend Therminstor
喷头热敏电阻
Non-control Fan
不可控风扇
Non-control Fan
不可控风扇
Control Fan/可控风扇
Control Fan
可控风扇
Heating Tube
加热管
Heating Tube
加热管
04
HEAT+
HEAT-
FAN+
FAN-
E
TH
FAN+
HEAT+
HEAT-
CR-Touch
K-FAN
FAN-
CR-Touch
自动调平套件
Motherboard Wiring Diagram 主板接线示意图