Creality CR-10 S5, User Manual

Page: 12 / 17

1
8
Aut
o home
、
Prepare→Auto home（Wait for the end of CR-touch detection platform）.
2、
Prepare→Move axis→Move Z（Adjust the value to 0）.
3 、
Control→Motion→Z O
ff
set（Observe the gap between the nozzle and the platform, and adjust Z o
ff
set to
make the distance between the nozzle and the platform about 0.2mm
）
4 、
Prepare→Disable steppers（Manually move the nozzle to the top of the platform adjustment knob, and adjust
the four knobs in turn to make the distance between the nozzle and the platform about 0.2mm. If necessary,
repeat the adjustment for 1 ~ 2 times）
Shenzhen Creality 3D Technology CO.,LTD.