4
DRAF
T
component or attempt to repair the product yourself.
This may expose you to electrical or other hazards and
will void the product warranty.
• The Sensor Module component contains a lithium-ion
polymer battery. Do not puncture the Sensor Module,
expose it to extreme heat, expose it to crushing loads,
or dispose of it in a fire. Do not attempt to replace the
battery. It is rechargeable but non-replaceable.
• For charging the device, use only the provided Charging
Cable, or another certified USB cable of less than 3 me
-
ters in length, plugged into a certified USB powered port.
•
Before wearing the Sensor Module for a significant dura
-
tion, first test to determine if your skin is sensitive to the
Sensor Module or Adhesive Sticker. Some people may
have adverse skin reactions.
• Each Adhesive Sticker is intended to be worn for up to 24
hours. Do not reuse stickers or wear for longer than 24
hours.
• Do not place the Sensor Module or Adhesive Sticker on
irritated or injured skin.
• When removing the Sensor Module and Adhesive Stick-
er, remove the device slowly from the skin, allowing the
Adhesive Sticker to gradually disengage.
• Do not wear the Sensor Module if it is damaged or exces-
sively hot after charging.
• Avoid exposing any of the product components to harsh
chemicals, including solvents and corrosive agents.
Harsh chemicals can damage plastic enclosures.
• Avoid exposing any of the product components to signif-
icant periods of direct sunlight. Ultraviolet radiation in
sunlight can damage or weaken plastic enclosures.
• To ensure proper functioning of the product and to avoid
data loss, follow the instructions provided in the ap-
proved software application, including instructions relat-
ed to syncing data and updating software and firmware.
CAUTION