NiftyCASE anatomy
Top I/O
cv1 & cv2 outputs
These outputs transmit a variable control voltage (CV) according to the eurorack 1 volt
per octave standard. These jacks are typically used for controlling the pitch of a voltage
controlled oscillator (but not limited to this use). The output voltage range is 0-10 Volts (
a ten octave span).
Cv1 responds to incoming MIDI notes on MIDI channel1.
Cv2 responds to incoming MIDI notes on MIDI channel2
Both CV outputs also respond to MIDI channels 3 and 10. Refer to the MIDI
implementation below for more details.
gate1 & gate2 outputs
These outputs are either on or off, transmitting 5V or 0V respectively.
The gate outputs are used to turn voices on or off. They can also be used to trigger
envelope modules.
Gate1 responds to incoming MIDI notes on MIDI channel1.
Gate2 responds to incoming MIDI notes on MIDI channel2
Both CV outputs also respond to MIDI channels 3 and 10. Refer to the MIDI
implementation below for more details.
Mod (aka modulation wheel) output
This output transmits a variable control voltage (CV) ranging from 0V to 10V.
This output responds to MIDI CC#1 (mod wheel) transmitted to NIftyCASE on MIDI
channel 1. Refer to the MIDI implementation below for more details.
