6.
7.
5.
Put 2 pcs Hexa washers in place, one to the left and the other
one to the right side of the Hexa footpad. Make sure the holes in
the washer are aligned with the inserts on the board. Tighten 2 pcs
screws slightly - left and right side of the Hexa footpad.
6.
Adjust the Hexa footpad angle to the desired position.
7.
Fully tighten the screws. Please check the footpad screws after
the first few rides, as they may come loose. If loose, make sure to
fully tighten the screws.
Summary of Contents for HEXA 2
Page 1: ...USER MANUAL...
