background image

Beverage Freezer

Operator Manual

Model 5311 and 5711

Grindmaster-Cecilware

4003 Collins Lane, Louisville, KY 40245 USA 
Phone: 502.425.4776 Toll Free: 800.695.4500
Fax: 502.425.4664
Web: gmcw.com  Email: [email protected]

Model 5311

Safety Information .....................................2
Specifications ..............................................3
Installation ..................................................4
Accessory Installation .................................6
Operation and Adjustments ......................7
Cleaning and Maintenance......................12
Troubleshooting .......................................20

Parts Identification ...................................22
Parts Diagram and List .............................23
Spinner Hook-Up ......................................34
Refrigeration Diagram and Parts List......35
Refrigeration Schematic (AC Units).........37
Wiring Diagrams.......................................38

Thank you for purchasing this quality beverage freezer. For your safety and the safety of others, read all
warnings and the operator manual before installing or using the product. Properly instruct all operators.
Keep training records. For future reference, record serial number here:

Table of Contents

©2016 Grindmaster-Cecilware

Printed in USA

0516 Form # WH-335-02

Part # 390-00054

Grindmaster-Cecilware provides the
industry’s BEST warranty. Visit gmcw.com
for warranty terms and conditions.

Model 5711

Summary of Contents for 5311













































Reviews: