800.967.6696 | crateandbarrel.com
Carefully place
mattress support panel
onto corresponding pins of assembly and secure with 4
bolt caps
as shown.
Secure each cap with
large Allen wrench
. At this point, fully tighten all bolts. Assembly is now complete.
Determine the desired height
(low, middle, high)
for the crib mattress. Fit each
support pin
into corresponding corner as
shown. Make sure support pin is securely engaged with assembly.
Made in Vietnam - r09
Mid-Century 3-in-1 Spindle Crib
Assembly Instructions
Page 5 of 6
5
6
Low
Middle
High
NOTE: Make sure
metal plate of mattress
panel is at the bottom
during assembly