V33-212 Tube Guitar Amplifier with Reverb
12
V33-212 TECHNICAL SPECIFICATIONS
Output Power Rating
28 W rms @ 10% THD, 8 ohm load, 120 VAC
Input Impedance
700 kohms
Signal-to-Noise Ratio
42 dB, Typical (Clean Ch only)
Gain
Overdrive Ch
102 dB, all controls @ 10
Clean Ch
56 dB, all controls @ 10
EQ
Treble: 12 dB range @ 6 kHz
Middle: 10 dB range @ 1 kHz
Bass: 8 dB range @ 150 Hz
Boost
10 dB @ 900 Hz
Presence
8 dB @ 10 kHz
Speaker Specs
2 x 12", 50 W, 16 ohm (2 in parallel = 8 ohm)
Ceramic
magnet
Preamp Tubes
(3) 12AX7
Power Tubes
(4) EL84
Power Requirements
90-132 VAC, 60 Hz, 85 VA
220-240 VAC, 50 Hz, 85 VA
Size (H x W x D)
22.00 in/55.9 cm x 27.85 in/70.7 cm x
10.50 in/26.7 cm
Weight
53.6 lb/24.3 kg
www.crateamps.com
@2007 LOUD Technologies Inc.
16220 Wood-Red Road NE • Woodinville, WA 98072
Part No. 0024536 Rev. A 07/07
Service Information
If you are having a problem with your V33-212, you can go to our website (www.crateamps.com)
and click on Support for service information, or call 1-800-898-3211 during business hours
(7 am to 5 pm PST, Monday-Friday). If you are outside of the U.S., contact your local distribu-
tor for technical support and service.
The V33-212 is covered with a durable fabric-backed vinyl material. Wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
“Crate” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks or
registered trademarks of their respective holders and are hereby acknowledged.
