V212B Guitar Speaker Enclosure
3
The Input/Output Plate:
1. Impedance Selector Switch:
Use
this switch to select 8 ohm mono
operation or 16 ohm stereo opera-
tion.
2. 50W 16 Ohms/100W 8 Ohms
1/4" Jack:
When using the cabinet
in the mono operating mode, connect
the output of your amplifier (rated
up to 100W into 8 ohms) to this jack
using the speaker cable provided.
When using the cabinet in stereo
mode, connect one of the stereo
outputs of your amplifier (rated up to
50W into 16 ohms) to this jack.
3. 50W 16 Ohms 1/4" Jack:
When
using the cabinet in the mono operat-
ing mode, do not use this jack.
When using the cabinet in stereo
mode, connect one of the stereo
outputs of your amplifier (rated up to
50W into 16 ohms) to this jack.
4. Right 1/4" Jack:
When using the
cabinet in the stereo operating mode,
connect this jack to the right channel
output of your amplifier.
When using the cabinet in the mono
operating mode, this jack is not used.
Refer to the illustrations on the right
for additional information.
c 2007 LOUD TECHNOLOGIES INC
DESIGNED IN ST.LOUIS MO, USA. MANUFACTURED IN CHINA, FABRIQUE EN CHINE
V212B
MONO
STEREO
50W 16 Ohms
50W 16 Ohms
100W 8 Ohms
SERIAL NUMBER
MANUFACTURING DATE
OUT
Mono Amplifier
V212B
Input Plate
8 Ohm Mono Configuration:
MONO
STEREO
50W 16 Ohms
50W 16 Ohms
100W 8 Ohms
LEFT OUT
RIGHT OUT
Stereo Amplifier
V212B
Input Plate
16 Ohm Stereo Configuration:
MONO
STEREO
50W 16 Ohms
50W 16 Ohms
100W 8 Ohms
