Crate V18-112 Owner'S Manual Download Page 3

V18-112/V18-212 Tube Guitar Amplifier with Reverb

3

Introduction

Congratulations!

 You are now the proud owner of a Crate V18-112 or V18-212 tube guitar 

amplifier. This combo amplifier packs a whole lot of vintage tube sound and classic spring 
reverb into its compact cabinet, providing you with an amp that is portable and easy to oper-
ate, yet still produces incredible sounds!

The V-Series amps offer the versatility required for many different musical styles, and have the 
unique tonal purity of a hot-rodded tube amp. The V18-112 and V18-212 are single-channel 
amplifiers with gain and master volume controls, treble/mid/bass tone controls, and an inter-
nal spring reverb. They crank out 18 watts from a pair of EL84 tubes into either one (V18-112) 
or two (V18-212) internal speakers.

Like all Crate products, your V18 amplifier is designed by musicians and built using only the 
best components. Each amplifier is tested to confirm that it meets our specifications, and we 
believe that this amplifier is the absolute best that it can be.

In order to get the most out of your new amplifier, please read this manual before you begin 
playing.

And 

thank you

 for choosing Crate.

Here are some of the features packed into your new V18 Combo Amplifier:

•  Two EL84 power vacuum tubes for smooth overdrive sound

•  18 watts rms power output

•  V18-112: 1 x 12" ceramic speaker

V18-212: 2 x 12" ceramic speakers

•  Line output for connecting to a mixer or recorder

• 3-band 

EQ

• Reverb 

control

Summary of Contents for V18-112













Reviews: