background image

GTX3500H TECHNICAL SPECIFICATIONS:

Output Power Rating

350W RMS @5% THD, 2

, 120 VAC

Input Impedance

470k

Total System Gain

Ch 1

74dB, all controls @10

Ch 2

88dB, all controls @10

Ch 3

103dB, all controls @10

Maximum Input Signal Accepted

5 volts peak-to-peak

Channel 1

Low Control

26dB range @ 70Hz

Mid Control

10dB range @ 900Hz

High Control

20dB range @ 10kHz

Channel 2

Low Control

26dB range @ 70Hz

Mid Control

10dB range @ 900Hz

High Control

20dB range @ 10kHz

Channel 3

Low Control

17dB range @ 100Hz

Mid Control

16dB range @ 1kHz

High Control

12dB range @ 7kHz

Power Requirements

120 VAC, 60Hz, 95VA
100/115VAC, 50/60Hz, 95VA;
230VAC, 50/60Hz, 95VA

Size and Weight

10” H x 30” W x 10-3/8” D, 41 lbs.

The GTX3500H is covered with a durable Tolex material: wipe it clean with a lint-free cloth.

Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.

Crate continually develops new products, as well as improves existing ones. For this reason, the specifications

and information in this manual are subject to change without notice.

www.crateamps.com

@2004 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63133

47-499-01 • 030204

Declaration Of Conformity

#30 , Effective 01-01-2001

Manufacturer’s Name:

SLM Electronics 

Production Facility:

1901 Congressional Drive, St. Louis, MO 63146, USA

Production Facility:

700 Hwy 202 W, Yellville, AR 72687, USA

Shipping Facility:

1400 Ferguson Ave., St. Louis, MO 63133, USA

Office Facility:

1400 Ferguson Ave., St. Louis, MO 63133, USA

Product Type:

Audio Amplifier

Complies with Standards:

LVD:

92/31/EEC, 93/68/EEC, & 73/23/EWG

Safety:

EN60065

EMC:

EN55013, EN55020, EN55022, EN61000-3-2,
& EN61000-3-3

Supplementary information provided by:

SLM Electronics - R & D Engineering 

1901 Congressional Drive, St Louis, MO 63146, USA

Tel.: 314-569-0141, Fax: 314-569-0175

Summary of Contents for TIDALWAVE GTX3500H

















Reviews: