The tilt back legs lock flat against the cabinet
when not in use - tighten the securing fasteners
completely to eliminate rattling.
Crate’s V32H amp head is designed to “piggy
back” mount onto the V212 enclosure. The V32H
has slide-out mounting hardware which lock onto
the posts on the top of the V212. Loosen the knobs
on the posts, slide the amp in place and lock down
the knobs.
The piggy-backed amp can be rolled around
on its casters by the amp head’s handle, but do
not try to pick the combo up by the amp head or
its handle.
The casters are to be removed before using the
cabinet in the tilt back mode. Swing each tilt back
leg into position and secure all hardware before
leaning the cabinet back. Do not allow the unit to
fall back on its own, rather, lower it into position.
(The cabinet should not be tilted back on slick or
smooth surfaces.)
V212 GUITAR SPEAKER ENCLOSURE
Summary of Contents for Palomino V212
Page 1: ......
